[PATCH] gnu: networkmanager-qt: Disable a failing test.

Done

Details

3 participants

Hartmut Goebel
Leo Famulari
Ludovic Courtès

Owner: unassigned

Submitted by: Hartmut Goebel

Severity: normal

Hartmut Goebel wrote on 21 Mar 2017 20:59

Recipients:(address . guix-patches@gnu.org)

Message-ID:1490126369-10238-1-git-send-email-h.goebel@crazy-compilers.com

The error-message was: "D-Bus library appears to be incorrectly set up;

failed to read machine uuid: Failed to open '/etc/machine-id':

No such file or directory".

* gnu/packages/kde-frameworks.scm (networkmanager-qt):

[disable-failing-tests] New phase.

---

gnu/packages/kde-frameworks.scm | 7 +++++++

1 file changed, 7 insertions(+)

Toggle diff (20 lines)diff --git a/gnu/packages/kde-frameworks.scm b/gnu/packages/kde-frameworks.scm
index 5b11f12..01bbe29 100644
--- a/gnu/packages/kde-frameworks.scm
+++ b/gnu/packages/kde-frameworks.scm
@@ -1113,6 +1113,13 @@ messages.")
     (arguments
      `(#:phases
        (modify-phases %standard-phases
+         (add-after 'unpack 'disable-failing-tests
+           (lambda* _
+             ;; Disable test requiring a dbus machine-id:
+             (substitute* "autotests/CMakeLists.txt"
+               (("^ecm_add_test\\(activeconnectiontest\\.cpp .*")
+                ""))
+             #t))
          (replace 'check
            (lambda _
              (setenv "DBUS_FATAL_WARNINGS" "0")
-- 
2.7.4

Hartmut Goebel wrote on 21 Mar 2017 21:04

Re:

Recipients:(address . 26211@debbugs.gnu.org)

Message-ID:f7d6af9d-fa2c-289c-c0df-ec0cfb0d5122@crazy-compilers.com

This fixes a build failure occuring since at least 2016-12-04.

This is the fixed version of the patch I sent (and retracted) yesterday

https://debbugs.gnu.org/cgi/bugreport.cgi?bug=26197

Regards

Hartmut Goebel

| Hartmut Goebel | h.goebel@crazy-compilers.com |

| www.crazy-compilers.com | compilers which you thought are impossible |

Leo Famulari wrote on 21 Mar 2017 21:24

Re: bug#26211: [PATCH] gnu: networkmanager-qt: Disable a failing test.

Recipients:(name . Hartmut Goebel)(address . h.goebel@crazy-compilers.com)(address . 26211@debbugs.gnu.org)

Message-ID:20170321202453.GA26232@jasmine

On Tue, Mar 21, 2017 at 08:59:29PM +0100, Hartmut Goebel wrote:

Toggle quote (26 lines)> The error-message was: "D-Bus library appears to be incorrectly set up;
> failed to read machine uuid: Failed to open '/etc/machine-id':
> No such file or directory".
> 
> * gnu/packages/kde-frameworks.scm (networkmanager-qt):
>   [disable-failing-tests] New phase.
> ---
>  gnu/packages/kde-frameworks.scm | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/gnu/packages/kde-frameworks.scm b/gnu/packages/kde-frameworks.scm
> index 5b11f12..01bbe29 100644
> --- a/gnu/packages/kde-frameworks.scm
> +++ b/gnu/packages/kde-frameworks.scm
> @@ -1113,6 +1113,13 @@ messages.")
>      (arguments
>       `(#:phases
>         (modify-phases %standard-phases
> +         (add-after 'unpack 'disable-failing-tests
> +           (lambda* _
> +             ;; Disable test requiring a dbus machine-id:
> +             (substitute* "autotests/CMakeLists.txt"
> +               (("^ecm_add_test\\(activeconnectiontest\\.cpp .*")
> +                ""))
> +             #t))

In (gnu packages gnome), there are some packages where we work around
this problem with (setenv "DBUS_FATAL_WARNINGS" "0").

If we used that instead, do you know if the test would still be able to
check some things for us? Or does it just disable the test in another
way?

Hartmut Goebel wrote on 21 Mar 2017 23:12

Recipients:(name . Leo Famulari)(address . leo@famulari.name)(address . 26211@debbugs.gnu.org)

Message-ID:d534c318-8345-ff0e-0cc0-7dd91ef6a94d@crazy-compilers.com

Am 21.03.2017 um 21:24 schrieb Leo Famulari:

Toggle quote (3 lines)

> In (gnu packages gnome), there are some packages where we work around

> this problem with (setenv "DBUS_FATAL_WARNINGS" "0").

Unfortunately this will not make the test pass.

TO fix the test, we would need to be able to create /etc&machine-id,

which is not possible in the build-container AFAIK.

Regards

Hartmut Goebel

| Hartmut Goebel | h.goebel@crazy-compilers.com |

| www.crazy-compilers.com | compilers which you thought are impossible |

Ludovic Courtès wrote on 25 Mar 2017 15:17

Recipients:(name . Hartmut Goebel)(address . h.goebel@crazy-compilers.com)(address . 26211@debbugs.gnu.org)

Message-ID:87lgrtwidy.fsf@gnu.org

Hi Hartmut,

Hartmut Goebel <h.goebel@crazy-compilers.com> skribis:

Toggle quote (4 lines)

> The error-message was: "D-Bus library appears to be incorrectly set up;

> failed to read machine uuid: Failed to open '/etc/machine-id':

> No such file or directory".

The output is:

Toggle snippet (24 lines)

starting phase `check'

process 2014: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory

See the manual page for dbus-uuidgen to correct this issue.

Test project /tmp/guix-build-networkmanager-qt-5.28.0.drv-0/build

Start 1: managertest

1/25 Test #1: managertest ...................... Passed 0.01 sec

Start 2: settingstest

2/25 Test #2: settingstest ..................... Passed 0.01 sec

Start 3: activeconnectiontest

3/25 Test #3: activeconnectiontest .............***Failed 0.81 sec

Start 4: 8021xsettingtest

[...]

96% tests passed, 1 tests failed out of 25

Total Test time (real) = 0.97 sec

The following tests FAILED:

3 - activeconnectiontest (Failed)

Errors while running CTest

phase `check' failed after 1.0 seconds

So the failure is the ‘activeconnectiontest’ test, not the D-Bus thing.

Outside the chroot build environment (and outside of ‘guix environment

-C’), this test passes.

When running “ctest --verbose”, we see:

Toggle snippet (20 lines)3: Test command: /tmp/guix-build-networkmanager-qt-5.28.0.drv-0/build/autotests/activeconnectiontest
Test timeout computed to be: 9.99988e+06
********* Start testing of ActiveConnectionTest *********
Config: Using QtTest library 5.7.1, Qt 5.7.1 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 4.9.4)
QWARN  : ActiveConnectionTest::initTestCase() networkmanager-qt: void NetworkManager::NetworkManagerPrivate::propertiesChanged(const QVariantMap&) Unhandled property "Devices"
QWARN  : ActiveConnectionTest::initTestCase() networkmanager-qt: virtual void NetworkManager::DevicePrivate::propertyChanged(const QString&, const QVariant&) Unhandled property "Carrier"
QWARN  : ActiveConnectionTest::initTestCase() networkmanager-qt: virtual void NetworkManager::DevicePrivate::propertyChanged(const QString&, const QVariant&) Unhandled property "HwAddress"
QWARN  : ActiveConnectionTest::initTestCase() networkmanager-qt: virtual void NetworkManager::DevicePrivate::propertyChanged(const QString&, const QVariant&) Unhandled property "PermHwAddress"
QWARN  : ActiveConnectionTest::initTestCase() networkmanager-qt: virtual void NetworkManager::DevicePrivate::propertyChanged(const QString&, const QVariant&) Unhandled property "Speed"
PASS   : ActiveConnectionTest::initTestCase()
FAIL!  : ActiveConnectionTest::testActiveConnection() Compared values are not the same
   Actual   (activeConnectionStateChangedSpy.count()): 0
   Expected (1)                                      : 1
   Loc: [/tmp/guix-build-networkmanager-qt-5.28.0.drv-0/networkmanager-qt-5.28.0/autotests/activeconnectiontest.cpp(118)]
PASS   : ActiveConnectionTest::cleanupTestCase()
Totals: 2 passed, 1 failed, 0 skipped, 0 blacklisted, 805ms
********* Finished testing of ActiveConnectionTest *********
 3/25 Test  #3: activeconnectiontest .............***Failed    0.81 sec

We can get more details as explained at

http://doc.qt.io/qt-5/qtest-overview.html by running:

dbus-launch /tmp/guix-build-networkmanager-qt-5.28.0.drv-0/build/autotests/activeconnectiontest -vs

That didn’t really help me though. The strace output shows nothing

obvious either (such uses code looking for actual network interfaces via

/proc/net/dev or using ioctls); it seems the code has complete mocks for

network interfaces and shouldn’t depend on the real network interfaces.

Could be maybe seek advice from upstream?

HTH,

Ludo’.

Ludovic Courtès wrote on 2 Jun 2017 18:32

control message for bug #26211

Recipients:(address . control@debbugs.gnu.org)

Message-ID:87r2z24agm.fsf@gnu.org

tags 26211 moreinfo

Ludovic Courtès wrote on 8 Sep 2017 17:46

Re: bug#26211: [PATCH] gnu: networkmanager-qt: Disable a failing test.

Recipients:(name . Hartmut Goebel)(address . h.goebel@crazy-compilers.com)(address . 26211@debbugs.gnu.org)

Message-ID:87a8259os0.fsf@gnu.org

Hi Hartmut,

Any update on this?

Thanks,

Ludo’.

ludo@gnu.org (Ludovic Courtès) skribis:

Toggle quote (73 lines)> Hi Hartmut,
>
> Hartmut Goebel <h.goebel@crazy-compilers.com> skribis:
>
>> The error-message was: "D-Bus library appears to be incorrectly set up;
>> failed to read machine uuid: Failed to open '/etc/machine-id':
>> No such file or directory".
>
> The output is:
>
> starting phase `check'
> process 2014: D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/etc/machine-id": No such file or directory
> See the manual page for dbus-uuidgen to correct this issue.
> Test project /tmp/guix-build-networkmanager-qt-5.28.0.drv-0/build
>       Start  1: managertest
>  1/25 Test  #1: managertest ......................   Passed    0.01 sec
>       Start  2: settingstest
>  2/25 Test  #2: settingstest .....................   Passed    0.01 sec
>       Start  3: activeconnectiontest
>  3/25 Test  #3: activeconnectiontest .............***Failed    0.81 sec
>       Start  4: 8021xsettingtest
>
> [...]
>
> 96% tests passed, 1 tests failed out of 25
>
> Total Test time (real) =   0.97 sec
>
> The following tests FAILED:
> 	  3 - activeconnectiontest (Failed)
> Errors while running CTest
> phase `check' failed after 1.0 seconds
>
>
> So the failure is the ‘activeconnectiontest’ test, not the D-Bus thing.
> Outside the chroot build environment (and outside of ‘guix environment
> -C’), this test passes.
>
> When running “ctest --verbose”, we see:
>
> 3: Test command: /tmp/guix-build-networkmanager-qt-5.28.0.drv-0/build/autotests/activeconnectiontest
> 3: Test timeout computed to be: 9.99988e+06
> 3: ********* Start testing of ActiveConnectionTest *********
> 3: Config: Using QtTest library 5.7.1, Qt 5.7.1 (x86_64-little_endian-lp64 shared (dynamic) release build; by GCC 4.9.4)
> 3: QWARN  : ActiveConnectionTest::initTestCase() networkmanager-qt: void NetworkManager::NetworkManagerPrivate::propertiesChanged(const QVariantMap&) Unhandled property "Devices"
> 3: QWARN  : ActiveConnectionTest::initTestCase() networkmanager-qt: virtual void NetworkManager::DevicePrivate::propertyChanged(const QString&, const QVariant&) Unhandled property "Carrier"
> 3: QWARN  : ActiveConnectionTest::initTestCase() networkmanager-qt: virtual void NetworkManager::DevicePrivate::propertyChanged(const QString&, const QVariant&) Unhandled property "HwAddress"
> 3: QWARN  : ActiveConnectionTest::initTestCase() networkmanager-qt: virtual void NetworkManager::DevicePrivate::propertyChanged(const QString&, const QVariant&) Unhandled property "PermHwAddress"
> 3: QWARN  : ActiveConnectionTest::initTestCase() networkmanager-qt: virtual void NetworkManager::DevicePrivate::propertyChanged(const QString&, const QVariant&) Unhandled property "Speed"
> 3: PASS   : ActiveConnectionTest::initTestCase()
> 3: FAIL!  : ActiveConnectionTest::testActiveConnection() Compared values are not the same
> 3:    Actual   (activeConnectionStateChangedSpy.count()): 0
> 3:    Expected (1)                                      : 1
> 3:    Loc: [/tmp/guix-build-networkmanager-qt-5.28.0.drv-0/networkmanager-qt-5.28.0/autotests/activeconnectiontest.cpp(118)]
> 3: PASS   : ActiveConnectionTest::cleanupTestCase()
> 3: Totals: 2 passed, 1 failed, 0 skipped, 0 blacklisted, 805ms
> 3: ********* Finished testing of ActiveConnectionTest *********
>  3/25 Test  #3: activeconnectiontest .............***Failed    0.81 sec
>
> We can get more details as explained at
> <http://doc.qt.io/qt-5/qtest-overview.html> by running:
>
>   dbus-launch /tmp/guix-build-networkmanager-qt-5.28.0.drv-0/build/autotests/activeconnectiontest -vs
>
> That didn’t really help me though.  The strace output shows nothing
> obvious either (such uses code looking for actual network interfaces via
> /proc/net/dev or using ioctls); it seems the code has complete mocks for
> network interfaces and shouldn’t depend on the real network interfaces.
>
> Could be maybe seek advice from upstream?
>
> HTH,
> Ludo’.

Hartmut Goebel wrote on 17 Sep 2017 13:18

Recipients:(name . Ludovic Courtès)(address . ludo@gnu.org)(address . 26211-close@debbugs.gnu.org)

Message-ID:7debf929-5d76-d354-e7e8-10f0637d18b6@crazy-compilers.com

This patch is no longer required with the current version.

Regards

Hartmut Goebel

| Hartmut Goebel | h.goebel@crazy-compilers.com |

| www.crazy-compilers.com | compilers which you thought are impossible |

Ludovic Courtès wrote on 17 Sep 2017 15:22

control message for bug #26211

Recipients:(address . control@debbugs.gnu.org)

Message-ID:87tw01ihoc.fsf@gnu.org

tags 26211 fixed

close 26211

Your comment

This issue is archived.

To comment on this conversation send an email to 26211@debbugs.gnu.org

To respond to this issue using the mumi CLI, first switch to it

mumi current 26211

Then, you may apply the latest patchset in this issue (with sign off)

mumi am -- -s

Or, compose a reply to this issue

mumi compose

Or, send patches to this issue

mumi send-email *.patch

is:open	open issues
is:done	closed issues
submitter:<who>	search issue submitter
author:<who>	search by message author
date:yesterday..now	search by issue date
mdate:3m..2d	search by message date